Battery, Charging & Starting System

Masterwerks has the personnel and equipment to fully diagnose and repair all battery, charging and startings system issues. The most common issue with the system as a whole is low battery charge levels due to worn or faulty cells in the battery. A fully charged battery will read 12.6 volts when tested with a voltmeter. A reading of 12.4 volts equals about 75 percent charge as is good enough for further testing. Anything lower and the battery is low and needs to be recharged. A good battery will accept and hold a charge, and deliver the rated number of amps on demand. A bad battery won’t accept a charge and cannot deliver its normal supply of amps because the cells are damaged or worn out.

The charging system should be checked when a battery is replaced or in a low-charge condition to verify it is operating properly. Masterwerks has all the necessary equipment to perform these tests and perform any repairs as needed.

Before and After Service

Masterwerks can also perform all repairs related to the starting system as well. Starter, ignition switch and shift interlock failure are all common to no-start conditions. These parts can be fully diagnosed and replaced as needed by Masterwerks trained personnel.

Complete vehicle electrical/wiring systems diagnosis and repair is performed on site. We perform all of our own electrical repair; no third party repairs or sublet is needed. Just another reason to consider us to be your one-stop complete repair center.

Contact Us for more information