Masterwerks :: Oil Change - Service Intervals

Oil Change Service

A Masterwerks Premium Oil Change is more than an oil change. It's a preventative maintenance program that enhances the reliability and longevity of your vehicle.

Our technicians will:

Change the oil with up to five (5) quarts of quality motor oil
Replace oil filter
Visually Inspect:
- antifreeze/coolant reservoir levels
- engine air filtration system
- serpentine belts
- brake fluid level
- wiper blades
Lubricate the chassis (when applicable)
Check tire pressure
Check and top off the following fluids:
- transmission/transaxle fluids
- differential fluid
- power steering fluid
- windshield washer fluid
- battery water (excluding sealed batteries)

Bonus! You will also receive free top-offs on motor oil and any or all of these five vital fluids between service visits for up to 3,000 miles. Additionally, we will perform a service review, which includes a visual inspection of the engine air filtration and the vehicle manufacturer's severe service* recommendations based upon the vehicle's current mileage.

*Refer to vehicle's owner's manual for a definition of driving conditions.

Premium Oil Change Services

Conventional Oil
Premium conventional oil which provides protection against viscosity and thermal breakdown.

Synthetic Blend Oil
Added protection during engine start up and for short trips. Contains an added level of synthetic protection.

Full Synthetic Oil
Outperforms conventional and blended motor oils. Independent tests prove that synthetic oil provides superior engine protection and performance.

Car Care Special $79.95
Normally $110.00
When Purchased Separately!

Change engine oil and oil filter, lubricate chassis as applicable. Install new air filter. Rotate tires as necessary and correct tire pressure. Complete vehicle inspection. Check and correct all fluid levels. Inspect belts & hoses. Test battery and inspect cables. Install advanced formula BG MOA oil Fortifier/Cleaner. Install BG CF5 fuel supplement to control intake, valve and combustion chamber deposits.

Additional Services

Cooling System Flush
Helps prevent corrosion, leaks and engine damage caused by worn out antifreeze. Service includes cooling system clean and flush, replacement of fluid and cooing system conditioner.

Automatic Transmission Flush
Helps extend the life of your transmission. Replaces virtually 100% of the transmission fluid. Service includes transmission system cleaner, replacement of up to 16 quarts of transmission fluid and transmission fluid conditioner.

Power Steering Flush
Removes worn out and dirty fluid to extend power steering component life. Includes new premium power steering fluid.

Brake Fluid Flush
Removes moisture-contaminated, dirty fluid to extend brake system component life and improve braking performance.

Gear Box Service
Differential, transfer case or manual transmission. Includes up to 5 pints of new gear oil.

Fuel Filter Replacement
Filters contaminants from fuel to protect fuel induction system. Helps maximize engine performance, fuel economy and fuel pump life.

Cabin Air Filter
Filters out pollen, dust and smog from your passenger cabin. Your vehicle may require it. Ask your service advisor for more information.

Air Filter Replacement

Battery Service

Serpentine Belt Replacement

Wiper Blade & Installation

Light Bulb Replacement

Tire Rotation

Additives & Treatments

Advanced Formula MOA

BG MOA® prevents oxidation and thickening of engine oil under even the most severe stop-and-go, high temperature driving conditions. It fortifies all qualities of engine oil to provide superior long-lasting engine protection and helps maintain optimum engine performance. BG MOA® keeps piston ring belts, hydraulic lifters and other engine components clean to help extend engine life and reduce costs of operation. It is compatible with both synthetic and petroleum-base oils.

The Thin Film Oxidation Uptake Test (TFOUT), ASTM Test Method D4742, proves BG MOA’s remarkable resistance to oxidation by more than 200% longer than six major brands of SL quality oil. At the conclusion of the API Sequence IIIF Engine Test‚ a major brand, high-quality reference oil barely passed the 80-hour test with a viscosity increase of 255 percent. At 80 hours, another brand of oil fortified with BG MOA® had a viscosity increase of only 57 percent. At the conclusion of the triple-length, 240-hour test, it was still well within the viscosity limits with an increase of only 198 percent.
Part No. 110, 11 oz. (325 mL) can

BG Quick Clean for Engines BG Quick Clean for Engines restores power and performance to your engine by rapidly and effectively removing accumulated deposits that form in the piston ring belt, hydraulic lifters, rocker arms and other critical engine parts. Add BG Quick Clean to the oil, then run engine for 10-15 minutes. When the old oil is drained, contaminants are quickly flushed away.
Part No. 105, 11 oz. (325 mL) can

Fuel/Air Induction Service

BG 44K® Power Enhancer® BG 44K® Power Enhancer® safely, rapidly and thoroughly removes engine deposits in combustion chambers, intake manifolds, ports and on valves. It restores flow in fuel injectors and cleans the entire fuel system. BG 44K® Power Enhancer® improves fuel economy and reduces exhaust emissions. It restores that “like new” driveability to an engine’s performance and keeps it running better, longer and more efficiently. Add one can or bottle to fuel tank at fill up. Catalytic converter and oxygen sensor safe. NOTE: After cleanup with BG 44K® Power Enhancer,® regular use of BG Supercharge®II, Part No. 202, in gasoline engines or BG Diesel Fuel Conditioner with DPL, Part No. 2276, in diesel engines will prevent deposits from forming in the fuel system and upper engine for maximum driveability and fuel economy.
Part No. 208, 11 oz. (325 mL) can

BG CF5® BG CF5® gasoline supplement is a unique, high-tech formulation designed to provide deposit control throughout the life of the engine. Added to vehicle fuel tank every 5,000 miles, BG CF5® will keep intake manifolds, intake ports, intake valves and combustion chambers clean and free of damaging deposits. Maintains “like-new” engine performance. One 11 oz. (325 mL) can treats 15 gallons (57 Liters) of fuel. Catalytic converter and oxygen sensor safe.
Part No. 203, 11 oz. (325 mL) can

Climate Control Service

BG Frigi-Clean® Odors, bacteria, mold, spores, fungi, road grime, nicotine oils and debris accumulate in your car’s air conditioning evaporator. BG Frigi-Clean® restores heating/cooling efficiency and freshens interior air. It is a unique cleaning solution designed to quickly and effectively remove foul odors, bacteria, mold, spores, fungi, road grime, nicotine oils and debris that accumulate in your car’s air conditioning evaporator. BG Frigi-Clean® is injected directly into the evaporator case. It foams up to completely fill the evaporator core where it also blasts away bug parts, pet hair, nicotine residue and other garbage. BG Frigi-Clean® is biodegradable, non-toxic, non-corrosive.
Part No. 709, Net Wt. 7 oz. (198.4 g)

BG Frigi-Fresh® BG Frigi-Fresh® is formulated to quickly and effectively eliminate foul, musty odors from automobile air conditioning systems. It kills mold, mildew and other odor-producing organisms that grow in the evaporator core and housing. Powerful deodorizers in BG Frigi-Fresh® keep the automobile interior smelling fresh and clean. EPA Reg. No. 44446-20-67145.
Part No. 7083, Volume 1.12 fl. oz. (33.1 mL)